欢迎您，浏览新港海岸（北京）科技有限公司官方网站！
服务热线：+86-10-53821869 / +86-755-23480857
产品描述
The NCS8610 is an AC/DC-coupled input HDMI signal to TMDS/DVI/FRL redriver supporting DVI 1.0 and HDMI 1.4b, 2.0b and 2.1 output signals. The NCS8610 supports four TMDS/FRL channels and Digital Display Control (DDC) interfaces. The NCS8610 supports signaling rates up to 6 Gbps at HDMI 2.0b or 12 Gbps at HDMI 2.1. The NCS8610 can be configured to support the HDMI2.0 or HDMI 2.1 standard. The NCS8610 supports dual power supply rails of 1.1V/1.2V on VDD11 and 3.3V on VDD33 for power reduction. The NCS8610 also supports single power supply rail of 3.3V on VDD33 and embedded LDO of 1.1V/1.2V on VDD11 by package pin option for cost sensitive application. NCS8610 supports fixed receiver EQ gain using I2C or pin strap to compensate for different lengths input cable or board traces.
产品参数
• Support both AC-coupled and DC-coupled TMDS or DisplayPort input
• Data rate up to 12 Gbps, compatible with HDMI 2.0b and HDMI 2.1 FRL
• Support DisplayPort Mode via I2C control
• Programmable receiver data lane equalizer gains up to 16 dB
• Global or independent lane control on EQ, pre-emphasis/de-emphasis, output swing and slew rate
• Three source termination impedances selection
• TMDS output amplitude adjust using onchip resistor or off-chip resistor
• Full lane swap on main lanes
• Supports Hot Plug Detect
• Pin Strap or I2C control
• Low Power Consumption from 1.1V/1.2V and 3.3V dual power supply rail
• Integrated on-chip 1.1V/1.2V LDO for single 3.3V option
• Temperature range: -20ºC to 85ºC
相关产品
产品咨询
北京总公司
北京市朝阳区望京绿地中心A座A区9层
深圳子公司
↵广东省深圳市福田区深南大道6019号金润大厦8层
西安分公司
西安市高新区锦业一路52号宝德云谷国际B座2003
合肥子公司
↵合肥市高新区创新大道2800号创新产业园2期F栋705
电话：+86-551-63657380
新港海岸（北京）科技有限公司
